Final Upload - Restore 365 (DASH)
SERVICEMASTER REVIEWER: Please remember to issue an email when estimates are reviewed with exceptions. We are NOT notified otherwise, despite all necessary preference and notification changes made to XactAnalysis as recommended by the review team. Thank you.
1. This is the Final Upload
2. Source of loss - {formtext: name=Source}{if: source = ""}{error: Enter source of loss; block=yes}{endif}
3. Category with explanation - {formmenu: Category 1 - "Category 1 water originates from a sanitary water source and does not pose substantial risk from dermal, ingestion, or inhalation exposure. Examples of Category 1 water sources can include, but are not limited to: broken water supply lines\; tub or sink overflows with no contaminants\; appliance malfunctions involving water-supply lines\; melting ice or snow\; falling rainwater\; broken toilet tanks, and toilet bowls that do not contain contaminants or additives." - IICRC S500: 2021 Section B. Definitions - Page 15 Category of water may be obtained by objective means of testing water contamination level such as ATP testing. Please reference supporting documents and notes regarding the determination of the category level.; default=Category 2 - "Category 2 water contains significant contamination and has the potential to cause discomfort or sickness if contacted or consumed by humans. Category 2 water can contain potentially unsafe levels of microorganisms or nutrients for microorganisms, as well as other organic or inorganic matter (chemical or biological). Examples of Category 2 water can include, but are not limited to: discharge from dishwashers or washing machines\; overflows from washing machines\; overflows from toilet bowls on the room side of the trap with some urine but no feces\; seepage due to hydrostatic pressure\; broken aquariums, and punctured water beds." - IICRC S500: 2021 Section B. Definitions - Page 16 Category upgrade due to dwell time or odor - Made at the determination of the professional expertise of the franchise. Category may be determined by objective means of testing water contamination level such as ATP testing. Please reference supporting documents and notes regarding the determination of the category level.; Category 3 - "Category 3 water is grossly contaminated and can contain pathogenic, toxigenic, or other harmful agents and can cause significant adverse reactions to humans if contacted or consumed. Examples of Category 3 water can include, but are not limited to: sewage\; wasteline backflows that originate from beyond any trap regardless of visible content or color\; all forms of flooding from seawater\; rising water from rivers or streams\; and other contaminated water entering or affecting the indoor environment, such as wind-driven rain from hurricanes, tropical storms, or other weather-related events. Category 3 water can carry trace levels of regulated or hazardous materials (e.g., pesticides or toxic organic substances)." - IICRC S500: 2021 Section B. Definitions - Page 16 Category upgrade due to dwell time, presence of microbial growth, or odor - Made at the determination of the professional expertise of the franchise. Objective means of testing water contamination level such as ATP testing. Please reference supporting documents and notes regarding the determination of the category level.; }
4. Class with explanation - {formmenu: Class 1 - "(least amount of water absorption and evaporation load): Water intrusion where wet, porous materials (e.g., carpet, gypsum board, fiber-fill insulation, concrete masonry unit (CMU), textiles) represent less than ~5% of the combined floor, wall and ceiling surface area in the space\; and where materials described as low evaporation materials or assemblies have absorbed minimal moisture (see definitions for Class 4 and low evaporation assemblies)." - IICRC S500: 2021 Section B. Definitions - Page 16; default=Class 2 - "(significant amount of water absorption and evaporation load): water intrusion where wet, porous materials (e.g., carpet, gypsum board, fiber-fill insulation, concrete masonry unit (CMU), textiles) represent ~5% to ~40% of the combined floor, wall and ceiling surface area in the space\; and where materials described as low evaporation materials or assemblies have absorbed minimal moisture (see definitions for Class 4 and low evaporation assemblies)." - IICRC S500: 2021 Section B. Definitions - Page 16; Class 3 - "(greatest amount of water absorption and evaporation load): water intrusion where wet, porous materials (e.g., carpet, gypsum board, fiber-fill insulation, concrete masonry unit (CMU), textiles) represent more than ~40% of the combined floor, wall and ceiling surface area in the space\; and where materials described as low evaporation materials or assemblies have absorbed minimal moisture (see definitions for Class 4 and low evaporation assemblies)." - IICRC S500: 2021 Section B. Definitions - Pages 16-17Class 3 - "(greatest amount of water absorption and evaporation load): water intrusion where wet, porous materials (e.g., carpet, gypsum board, fiber-fill insulation, concrete masonry unit (CMU), textiles) represent more than ~40% of the combined floor, wall and ceiling surface area in the space\; and where materials described as low evaporation materials or assemblies have absorbed minimal moisture (see definitions for Class 4 and low evaporation assemblies)." - IICRC S500: 2021 Section B. Definitions - Pages 16-17; Class 4 - "(deeply held or bound water): water intrusion that involves a significant amount of water absorption into low evaporation materials (e.g., plaster, wood, concrete, masonry) or low evaporation assemblies (e.g., multilayer wallboard, multilayer subfloors, gym floors, or other complex, built-up assemblies). Drying may require special methods, longer drying times, or substantial water vapor pressure differentials." - IICRC S500: 2021 Section B. Definitions - Page 17}
5. Was Mold Found? {formmenu: Yes; default=No} If so, was over 10 SF found? - {formmenu: Yes; default=No}
6. Asbestos or lead testing needed? {formmenu: default=Yes; No; name=Asbestos Testing} -Why? It is state law -Result? - {formmenu: default=NA; Non-Detect; Positive}
7. List all demo required and justification - {formmenu: Removal of all moisture binding and damaged materials in order to dry substructure; default=Removal of all affected materials due to category of water}
8. Was loss monitored daily? {formmenu: Yes; default=No; name=Monitoring} If no, why? - {if: monitoring}Loss was monitored daily{else}Insured was not available{endif}
9. Specialty equipment used and justification - {formtoggle: name=Yes\ ; default=no}{formtext: name=Specialty Equipment Used}{endformtoggle}{formtoggle: name=No\ ; default=yes}{formtext: name=N/A; default=N/A}{endformtoggle}
10. List any special circumstances - {formtext: name=Special Circumstances; default=NA}
11. Adjuster Name, Email Address, and Phone Number - {formtext: name=Adjuster Name, Email and Phone; cols=150}{if: `adjuster name, email and phone` = ""}{error: Enter adjuster details; block=yes}{endif}
12. Adjuster Approvals/Notifications - {import: /approve} {formtoggle: name=Mold?; default=no}{formtext: name=Mold Approval; default=Adjuster approved mold remediation under HMR line items}{endformtoggle}
13. Please add a note documenting the circumstances surrounding subrogation including who has the part. {formtoggle: name=Yes \ ; default=no}{formtext: name=Explain}{endformtoggle}{formtoggle: name=No \ ; default=yes}{import: /sub}{endformtoggle}